• Multiparametric measure : organic matter (COD, BOD, TOC, TSS), specific compounds.
  • All types of water (natural water, raw sewage water, treated water, process water.
  • Fast.
  • Convenient.
  • Without reagent.
  • User friendly.
  • If modified can be used to analyise soil for PAH's.


Ammonia

UV COD

Nitrate

Total Nitrogen & Kjeldahl Nitrogen

Total Phosphorus

Respiration Rate (BODst & Toxicity)

Mono/Multi Parameter UVpcx

Multi-Parametric
UV

Multi-parametric
Spectral UV

Multi-Channel
Touch Screen
Controller

Chlorophyll A/Hydrocarbons in Water/Flourescent Tracer
Traditional measurement methods are not adequate to cope with the problems of water resources and with environmental attacks. SECOMAM, in association with Monsieur Olivier THOMAS of the Ecole des Mines d'ALES, has developed an alternative technique based on the analysis of UV absorption spectra of the samples.

This technique brings about a considerable gain in terms both of cost and time.

Multiparametric:
The Pastel UV is able to measure 6 parameters simultaneously and thus permits rapid characterisation of the effluent. These parameters can be varied from one user to another.

Rapidity:
After the sample has been taken with a micropipette and the quartz cuvette has been filled, analysis and reading of the results takes no more than a minute.

This rapidity makes it possible to carry out a large number of measurements and to react in real time in cases of accidental pollution or of a process incident.

Simplicity:
The sample does not require pre-treatment; if the sample is too concentrated, the apparatus itself will calculate the dilution factor to apply.

Pastel UV can be used by personnel who do not possess special qualifications in chemistry.

Economy:
Pastel UV operates without reagents and without consumables; the cost of running the machine is therefore independent of the number of analyses performed.

Autonomy:
Its autonomy in the field encompasses 100 measurements and it can memorise up to 200 results.

Traceability:
All the data can be stored with a sample number, the user code, the site and the date.

Possible uses:

- Control of organic and particulate pollution
- Protection in the face of accidental pollution incidents
- Process control
- Control of the conformity of discharges in the receiving environment
To make a purchasing enquiry on this product please click here

Copyright Robin Instruments Ltd. 2001-2002